Spot iron gray& Nbsp;
AI Gesture recognition dual axis follow camera PTZ
操作方式
1) Place the phone into the device clamp according to the arrow markings, and manually rotate the knob to
The phone is firmly clamped and can be placed horizontally and vertically
2) Start the device and operate according to the gesture of the character in the picture. When operating, please keep your gestures completely parallel and open, place them in front of or on the side of the body (not far away) to form an overall structure with the person, and be careful not to block the face, so that the device can recognize silent commands. There is no need to adjust the angle when standing or sitting down, and the PTZ automatically follows the AI Gesture recognition dual axis following the PTZ
站立或者坐下无需调整角度,云台自动跟拍
Function Introduction:
Key description:
Long press the switch button, the device will turn on a red light, and vice versa.
Indicator light prompt:
The red light comes on after the device is turned on; Make an OK gesture and turn on the follow up when the green light is on. Make a palm gesture and pause the follow up when the red light is on; When the device is in a state of power shortage, it does not follow the red light flashing, and the low battery green light also flashes. The red light is always on when the device is charging, and the red light is off when it is fully charged, and the green light is on.
Function description
After the device is turned on, play the OK gesture to start the follow-up following mode to ensure that the face is within the camera's visual range, at this time the device is in the following state, and the device will follow the position of the humanoid face.
The best effective distance for gimbal follow-up is 1-6M. If you need to turn off follow-up, pause the follow-up function with a palm gesture
Tips:
1.此产品包含电池,请勿将产品置于高温/高湿环境中,以免发生意外.
2,请勿手动转动云台,避免破坏内部结构,造成损坏
CLOUD PLATFORM OF AI GESTURE RECOGNITION FOLLOW WITH TWO AXIS
Cloud Platform of AI Gesture Recognition Follow with Two Axis
Operation Manual
OPERATION MODE
(1)Put the smart phone into the device clip according to the arrow mark.Turn the knob manually to hold the smart phone firmly, and the smart phone can be placed horizontally and vertically
(2)According to the figure gesture operation after power on . When operating, and to keep the gesture completely parallel and open, place it in front or side of the body to form an overall structure with the person. Please pay
attention not to cover the face, and so that the device can recognize the silent directions.
(3)No need to adjust the angle when standing or sitting,and automatic follow shot .
FUNCTION INSTRUCTION
The Button
Long press power on/off key ,and the device keeps red indicator .Long press again with power off .
Indicator Lamp Direction
After power on with Red indicator lighting . Please make "OK" gesture to start the follow-shot with green indicator on. To pause the follow-shot with Red indicator on after made "Palm" gesture. When low power green indicator flashing but red indicator no flashing .When charging, the red indicator lights on. After charged full, and the green indicator on
Function Direction
Make sure the face is within the range of the camera.After power on, and made "OK" gesture to start the follow shot .At this time, the device is in the following state, and the device will follow the position of the person face. To keep the best distance within 1-6m when following. Please make "Palm"gesture to pause the follow shot
Tips
1.The device is built-in battery. Don't put it into high temperature or high humidity place in case of accident
2.Don't rotate by the hand to avoid damaging the internal structure .
&Nbsp; The following is in English:
