The SURECOM SF-103 hand-held frequency counter is a more practical counter, even advanced features such as field strength measurement are incorporated. It is compact, truly pocket sized, test instrument designed for ease of use and dependable performance. Supplied as a complete with internal Li-ion battery pack, AC wall charger and antenna.
Introduction:
The frequency meter capable of measuring the parameters of the frequency of the continuous carrier signal walkie-talkies , with signal strength indicator.
it is the tool of choice for maintenance personnel ,test frequency and signal strength for wireless enthusiasts.
This portable frequency counter is designed for counting continuous wave signal comes from Two-way Radio.
There are easy ranges for you to choose. The ranges cover most of the frequency of the two way radios you want to measure.
Its four-button control is easy to use and its small size allows you to carry it anywhere you like.
Work by TCXO(Temperature Compensate X'tal (crystal) Oscillator) ,In the range of -45 ℃ ~ 65 ℃ can reach ± 2 ~ ± 4ppm accuracy
This include very interesting frequency areas such as 2m HAM radio, all VHF and UHF
DMR Radio signal e frequency counter.
GUI Battery level
Feature & Specification:
Frequency range two select : 2MHz-200MHz / 27MHz -2800MHz
CTCSS/DCS Decoder
Frequency counter Digital mode for DMR radio
Work by TCXO( Temperature Compensate X'tal (crystal) Oscillator) 2～2.5ppm
Frequency Response time: 0.2-0.5sec.( CTCSS/CDCSS >0.5-1sec)
TFT Color Display 240 x 320 ,LCD Dim level setting
Build-in Li-ion battery
Net Weight: 113g
4 buttons control
Auto power off 1-9minutes
Charging battery LED indicator
Package include:
1 x SF-103 frequency counter
1 x DUAL BAND UHF / VHF antenna
1 x BELT CLIP
1 x USB CHARGER with cable .
1 x ENGLISH MANUAL
User manual:
1.1 Power On/Off:
Power on ,press and Hold down the [Red key] by 3 second
Power off ,press and Hold down the [Red key] by 3 second of number count down to 0
1.2 Charging the battery :
Plug the power cord into adaptor , micro usb connect SF103
The Led indicating: *The RED light Charging * The Green light is Full
1.3 Setup the frequency Range :
Press[ F2.stop ] button ,[F3 -->] select function to "Rang"
Press the [F4 Ent] Select 27M-2.8G(27MHz-2800MHz) /<=200MHz (below 200MHz) ,
and then press[F2] to Run
1.4 Setup the time Gate :
Press[ F2.stop ] button ,[F3 ---> ] select Function to "Gate"
Press the [F4 Ent] select : 0.1s / 0.25s / 0.5s / 1.0s ,and then press [F2] to Run
1.5 Setup the Frequency counter digi :
Press[ F2 ] botton ,[F3--->] select Function to "Gate"
Press[F4 Ent] Select : 3 / 4 / 5 / 6 , and then press [F2] to Run
! 27MHz-2.8GHz for 3 / 4 only , 2-200MHz for 3 / 4 / 5 / 6 , Detail Please see Table 1:
1.6 How to check Frequency of Digital DMR Radio
Press[ F2 ] botton ,[F3 --->] select Function to" type" :Press [F4] select Analog / Digital(DMR) ,
and then Press [F2] to Run
!Note. Digital mode have 3 Decimal only.
1.7 How to ADJ. the Frequency mode of 27MHz -2.8GHz: ( See PIC.2)
detailMore