Skip to product information
1 of 6

Anbaduba

WAVLINK AERIAL AX1800 HD6 Outdoor WiFi AP Dual-Band 2.4GHhz 5GHz Long Range Power Wireless Waterproof Outdoor Router WN573HX1

WAVLINK AERIAL AX1800 HD6 Outdoor WiFi AP Dual-Band 2.4GHhz 5GHz Long Range Power Wireless Waterproof Outdoor Router WN573HX1

Regular price $201.33 USD
Regular price $0.00 USD Sale price $201.33 USD
Sale Sold out
Plug Type
View full details
AERIAL HD6 WiFi 6 AX1800 Wireless Outdoor Access Point Dual Band IP67 Waterproof
 
Enjoy True WiFi 6 Speed : The next generation of WiFi, complies with IEEE 802.11 ac/a/b/g/n standards. Supports dual-band
maximum speed up to 5GHz 1201Mbps and 2.4GHz 574Mbps, avoiding wireless interference & congestion and
offering lightning-fast Internet speed.you can enjoy HD videos, smooth gaming, etc. even outdoors.
 
Common indoor/outdoo r : You can install it anywhere you want,Place as you like,Equipped with IP67 waterproof enclosure,
15kV ESD protection and 6kV lightning protection, it can work normally in rain/snow/wind/thunder and other bad weather.
 
Multiple Modes, Flexible Use : Supports Mesh agent, AP,Mesh Router, Repeater, AP+Repeater and other modes to meet your
different needs and apply to more outdoor use scenarios.Note: If you need to use special characters, please search for 573HX1
in Firmware on the Wavlink website to upgrade the latest firmware.
 
Seamless WiFi Roaming : The 4x8dBi omnidirectional antennas and two built-in high-power amplifiers provide extreme WiFi coverage and
penetration. Also supports Mesh technology, one-click brings more device connections, greatly expanding the WiFi coverage,
and eliminating every network dead zone.
 
Optional PoE Power Supply : Supports 802.3AF/AT active PoE and passive PoE, transferring data and charging the product with
a single Ethernet cable, so you can install the product outdoors where power outlet is not available.
Note : The PoE converter is not waterproof.
Please use CAT5E or above cable and the length should not exceed 100m/328ft.
 
Fiberglass tube high-gain antennas : The 4x8dBi omnidirectional antennas and two built-in high-power amplifiers provide extreme WiFi coverage
and penetration.Higher antenna gain strengthens Wi-Fi signal and expands wider coverage in the open air, stability technology automatically
avoids channel conflicts , meet outdoor long range coverage wireless network requirement,
 
More usage scenarios : High Power Amplifiers enhanced receiver design for more strong penetration & longer range coverage,
ideal for providing Wi-Fi service in big area such as Home,Camping,Factory, Community, Street.
 
About After Sales : Please feel free to contact us in the buyer communication if you have any question, We will provide solutions within
12 h, 12-month worry free warranty( extra 6 months for registered members) and life-long technical support.
 
Specification
- Model: WL-WN573HX1
- Product Size(without antennas): 24x24x7cm/9.4x9.4x2.8in
- PoE Converter Size: 4.4x3.7x2.2cm/1.7x1.5x0.9in
- Length: Antennas - 40cm/15.7in; Ethernet Cable - 100cm/39.4in; Power Adapter Cable - 130cm/51.2in
- Product Weight(without antennas): 1109g/39.1oz
- Standard: IEEE 802.11 ax/ac/a/n/g/b
- Frequency Band/Speed: 2.4GHz(574Mbps)+5GHz(1201Mbps)
- Wireless Security: WPA2-PSK, WPA2/WPA3-MIX
- Antennas: 4 x 8dBi Omnidirectional Antennas
- PAIR/RESET LED: Blue
- PoE Converter Status LED: Green
 

Warm Tips
①The PoE converter is not waterproof, please install it indoors.
②Please make sure your Ethernet cable is CAT5E or above certified and shorter than 100m/328ft.
③Please install the product 2-3 meters above the ground for better performance.
④Under the mesh mode, WN573HX1 ONLY supports interconnection with WN531AX2, WN583AX1 and WN573HX1.

In the Box
1 x Wi-Fi6 Outdoor Mesh Router/AP/Repeater
4 x Omni Antennas
4 x Cable Ties
1 x Ethernet Cable Connectors
1 x Quick Installation
1 x Wrench
2 x Silicone Pads
Several Screws
Passive PoE(Optional):
1 x 54V Power Adapter
1 x PoE Converter
1 x Ethernet Cable

 

How to install antennas and Ethernet cable?
①Pass the RJ45 cable through the waterproof connector cover.
②Screw the waterproof seal into the waterproof connector bracket.
③Pass the RJ45 cable through the waterproof connector bracket, and screw the waterproof connector bracket into the cover.
④Put the waterproof sealing ring on the waterproof connector bracket.
⑤Connect the RJ45 cable to WAN/LAN port.
⑥Screw the connecting cable into the 2.4G and 5G antenna connector and screw up the connector.
Note: The PoE converter is not waterproof, please install it indoors. Please make sure your Ethernet cable is CAT5E
or above certified and shorter than 100m/328ft.

How to install the product on a column?
①Stick two silicone pads on the bracket and post respectively.
②Thread the cable ties through the fixing point of the bracket.
③Fix the product to the post with cable ties.